Page 10

TECHNICAL SAFETY INSPECTION
 

All vehicles and participants must undergo a Technical Safety Inspection (“Tech”) to insure compliance with the Rules, Requirements and Specifications.  Each driver/rider is responsible for the safety and race worthiness of his/her vehicle.  No equipment shall be assumed "approved" because it went through Tech at other racing events, it passed Tech previously at an MKM event, or because this rulebook does not specifically exclude it.  All vehicles must be maintained in a safe condition at all times.  Passing Tech Inspection does not relieve the driver/rider of any liability.

1. You must come to Technical Inspection with your vehicle 100% ready to race in full compliance with the personal equipment required for your Division/Class, including, but not limited to, the following:
    
• All safety equipment installed. Any required event sponsor decals affixed.
   
• The driver/rider must be present, and must be prepared to don any personal safety equipment required and belt in as he/she would during the event, if requested.
   
• All camera mounts with cameras installed.
   
2. Any vehicle not passing inspection will have to repair the deficiency or make necessary repairs prior to running in the event.
    
3. No modifications are permitted after the final inspection unless coordinated with the Race Director and Chief Technical Inspector. This includes any change in vehicle condition after the vehicle passes Tech, due to breakdowns or failures, flat or damaged tires, or any other reason.
    
4. At the discretion of the Race Director, or his/her appointed officials, vehicles which do not meet minimum technical inspection standards in a particular Division/Class may be transferred to an appropriate Division/Class for which they qualify.  There will be no adjustment of the entry fee in this circumstance.
    
5. Any vehicle not in compliance with the Rules, Requirements, and Specifications will not be allowed to enter the event.